Cooling and Heating Equipment

Product Details:

For mixing and grinding electrically operated.  Fitted with FHP geared motor with maximum speed of 80 RPM. Jar is made of Aluminum/S.S.  having steel balls of different sizes. Jar is inter-changeable and easily removable to operate on Single Phase 220 / 230 volts A.C. supply.

Product Details:

Specifications:

• The body is made of S.S / P.C.R.C. Sheet duly powder coated.
• The top cast iron heating plate is round having 20 cm. dia.
• With heating elements of 1.5 KW rating.
• Temperature is controlled by energy regulator up to 350°C.

Product Details:

·         Space between inner chamber and outer wall is filled with high grade mineral wool for minimal heat dissipation

·         Mounted on caster wheels for easy portability

Door fitted with heavy duty hinges and door handle ensuring there are no leakages through the door gasket

Product Details:

Specification:

• Double walled interior made up of stainless steel & exterior made up of mild steel in powder coating paint / stainless steel. Glass wool/PUF insulation between both the wall is provided. Full length inner glass door and outside metal door with magnetic gasket &lock. Forced air circulation for uniform temperature. Stainless steel perforated tray is provided. The tray can be placed at various heights to accommodate the change in sample height. The purpose of doing so is to vary the exposure intensity to reduce the test duration. PU wheels for easy move ability.

Illumination:

• Chamber is illuminated using fluorescent tube light to produce visible light (measure in lux). A UV light of wavelength 365 nm (measured in watt/sq. meter) is fitted on topside of chamber.

Control system:

• Temperature controller with Micro Processor Based Digital Temp. Controller.

Humidity system:

• Humidity is by steam injection and is directly displayed in % RH measured by capacitance type Electronic Humidity Sensor.

Product Details:

The Dehumidifier has an Individual function to condense the moisture. The tendency of moisture always is to flow from higher moisture zone to the lower moisture zone. Thus the moisture flows between the substances in the room and the space. The function of the Dehumidifier is to reduce the moisture content in the space. During the process of Dehumidification the space becomes gradually dry and accordingly moisture flows from the materials to the space. At the same time moisture infiltrates to the space through structure, crevices around doors, windows, ceiling, partitions and while opening the entry doors as the vapor pressure is higher outside than inside the room. Further moisture will also be added to the space by hygroscopic substances and persons working in the space.

Product Details:

Features:

• Many area of plant research require the use of a controlled environment. In this way, a plant’s response to different conditions can be monitored or a particular habitat imitated. Standard propagation techniques can be greatly speeded up using a growth cabinet as well as achieving a higher success rate. Where micro propagation is beingused a growth cabinet is essential for rooting the plantlets and adapting them to normal conditions. This plant growth cabinet is ideal forall routine propagation and researchapplications.
• Oriented design of shelves makes you adjust each space of shelveswithout difficulty.
• With a solid see through double walled door and a full view inner plexi-glass door enables inspection and monitoring of inner chamber specimens without disturbing the processtemperature.
• Front double walled door is provided with lock and keyarrangement.
• Caster wheel mounted for easy portability.

Product Details:

Features:

• Accurate temperature control with high stability & uniformity
• Digital micro controller
• Touch panel setting control
• Display of Set Value and process value Fast heat up speed

GGT - 1570

Product Details:

Humidity chambers are Pre-fabricated double walled chamber with 60 mm thick insulation with puff between interior ,convection heated and cooled units. Outer body of our Plant Growth chambers are constructed out of thick PCRC sheet duly pre-treated with primers and rust proofing and elegantly powder coated..The inner chamber is made of heavy gauge stainless steel sheet of SS-304 grade The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our walk in incubators.The unit is provided with two doors , the inner door is made of thick plexi glass/float glass, to view the specimens/culture media/stocks, without disturbing the temperature of the chamber. This door is provided with magnetic door closer. The outer door is made of mild steel sheet lined with stainless steel from inside.. This door is provided with lock and key arrangement. The unit is mounted on a sturdy steel frame The unit is provided with various customized shelves in various permutations and combinations to suit individual requirements.. The triple walled back of our Humidity chambers are provided with on both Sides, air circulation fans for uniform maintenance of the temperature throughout the chamber.

Product Details:

Humidifier with precise high efficiency evaporation, very effective mist dispersal, completely self contained, water atomizer, air distributor designed for minimum maintenance and very used operating cost. Generally used in Clinics, Operation theaters, Nursing home, Mushroom plant, Tea Processing, Tobacco Processing, Hotels, Offices, and other industries.

Outstanding Features:

• High efficiency evaporation.
• Designed for minimum maintenance.
• Atomizes water into a fine mist for rapid evaporation.
• Distributes the humidified air uniformly throughout room.

Product Details:

Product Over View:

• Our chemical fume hoods are conceptualized and designed to provide a work area which is free from all the potentially hazardous fumes or chemical effluents that may be emitted during the course of a given experiment or procedure in a laboratory.
• Our fume hoods capture the fumes released during an experiment by drawing fresh air from the environment, past the user into the unit.. This way the
• concentration of the chemical fumes/effluents are kept at the minimum possible
• levels in and around the breathing zone of the user. The vector of the air in the
• fume hood points to the inward direction and perpendicular to the face of the user.
• The velocity of the air is controlled at approximately 80 feet per minute, so as to
• control the particle kinetics of various aerosols and diffused gases.

Features:

• Ergonomic Design
• Energy Efficient Mechanism
• Low Noise Levels
• Conforms To ASHRAE-110-1995 (British Standard) Testing Method.

Construction Details:

• Our fume hoods are developed to be used as semi closed ventilated enclosures so as to protect the user from harmful and toxic fumes and vapors and to eliminate the possibility of accidental fire, which may be resulted due to the emission of inflammable gases during the course of a given experiment.
• Hence the material of construction of all our fume hoods are carefully chosen S.S-316 grade/ M.S duly Powder Coated. The work table is made of heavy gauges SS-316. All our fume hoods are provided with sliding sash made out of special grade shatter proof temper glass duly framed in aluminum frame with sliding motion and counter weight balanced mechanism.
• Our units ensure minimum illumination level of approx 800 lux on the work table.
• The unit is equipped very diligent heavy duty exhaust system, comprising of dynamically balanced centrifugal impeller with high speed motor of approx 1440 RPM (Heavy Duty 1/4 H.P A.C Motor ).

Air Velocity:

• Our fume hood ensure that the optimum face velocity of 80 feet – 100
• Feet per minute is maintained with an accuracy of + 10 feet/minute with the sash in complete open position.

Volume Of Exhaust:

• Our fume hoods are capable of maintaining a constant exhaust volume.
• The maximum variation permissible due to baffle adjustment, in our in house test procedure is 6% of the given volume of exhaust.

Testing Procedures Of Containment:

• Our fume hoods conforms to the performance test as per ASRAE-110-1995 British Standards of testing performance of chemical hoods.
• They have a AM (As manufactured) rating of 0.05 ppm/4 LPM at fully opened sash.
• Pressure (Static) Our fume hoods are designed to minimize the loss of static pressure at a given baffle opening position.
• As per our standard procedures the average loss of static pressure at any given four points at ninety degree angle and 3 duct dia from the fume hood will not exceed 75 feet perminute at 0.25 inch, with full sash opening and face velocity of 100 feetper minute.

Illumination Levels At work Space:

• Our fume hood ensure that a minimum of 800 lux light is available on the work table through the diffuser fluorescent light arrangement.

Exhaust Assembly:

• Our fume hoods are provided with a very strong and high end exhaust
• System having a range of 500 – 1250 CFM (designed as per the size of the hood). The exhaust assembly consists of a dynamically balanced
• Centrifugal impellers which are coupled with a heavy duty three phase
• Motor of crompton greaves/equivalent.