Lab Incubators

Product Details:

These simple and versatile instruments are found in applications including nucleic acid hybridization such as Northern (RNA) blots/hybridization, Southern (DNA) blots/hybridization, Western (Protein) blots, and molecular biology assays.

Used in life science laboratories to perform membrane hybridization with a hybridization incubator. Hybridization incubators, also known as hybridization ovens, provide defined temperature control, agitation, and consistency throughout the incubator chamber.

Product Details:

BOD Incubator is double walled convection heated units. Outer body of our incubators a reconstructed out of thick PCRC sheet duly pre-treated with primers and rust proofing and duly powder coated.. The inner chamber is made of heavy gauge stainless steel sheet of SS-304 grade. The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our bod incubators. The unit is provided with two doors, the inner door is made of thick plexiglass/float glass, to view the specimens without disturbing the temperature of the chamber. This door is provided with magnetic door closer. The outer door is made of mild steel sheet lined with stainless steel from inside.. This door is provided with lock and key arrangement. The unit is mounted on a sturdy steel frame and provided with castor wheels for easy movement inside the laboratory. The unit is provided with three stainless steel shelves. The triple walled back of our bod incubators are provided with two air circulation fans for uniform maintenance of the temperature throughout the chamber.

Features:

• Versatile usage.
• Ergonomic Design
• Energy Efficient
• CFC free cooling
• Long life
• Low Maintenance

Product Details:

CO2 incubators (Carbon Di Oxide Incubators) are double walled convection heated units. Outer body of our incubators are constructed out of thick PCRC sheet duly pre-treated with primers and rust proofing and elegantly powder coated. The inner chamber is made of heavy gauge stainless steel sheet of SS-304 grade. The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our CO2 incubators (Carbon Di Oxide Incubators) The unit is provided with two doors, the inner door is made of thick plexi glass/float glass, to view the specimens without disturbing the temperature of the chamber. This door is provided with magnetic door closer. The outer door is made of mild steel sheet lined with stainless steel from inside. This door is provided with lock and key arrangement. The unit is provided with two stainless steel shelves. The triple walled back of our CO2 incubators are provided with two air circulation fans for uniform maintenance of the temperature throughout the chamber.

Heating:

• Indirect heating system is provided in our units, comprising of air heaters made of high grade Kanthal A-1 wires of suitable wattage.The warm air is evenly distributed throughout the chamber through efficientmotor fans ensuring a very good temperature sensitivity. 

Product Details:

CO2 incubators (Carbon Di Oxide Incubators) are double walled convection heated units. Outer body of our incubators are constructed out of thick PCRC sheet duly pre-treated with primers and rust proofing and elegantly powder coated. The inner chamber is made of heavy gauge stainless steel sheet of SS-304 grade. The gap between the walls is filled highgrade mineral glass wool, which ensures maximum thermal efficiency in our CO2 incubators (Carbon Di Oxide Incubators) The unit is provided with two doors, the inner door is made of thick plexi glass/float glass, to view the specimens without disturbing the temperature of the chamber. This door is provided with magnetic door closer. The outer door is made of mild steel sheet lined with stainless steel from inside. This door is provided with lock and key arrangement. The unit is mounted on a sturdy steel frame and provided with cator wheels for easy movement inside the laboratory. The unit is provided with two stainless steel shelves. The triple walled back of our CO2 incubators are provided with two air circulation fans for uniform maintenance of the temperature throughout the chamber.

Heating / Cooling:

• Indirect heating system is provided in our units, comprising of air heaters made of high grade Kanthal A-1 wires of suitable wattage.. The warm air is evenly distributed throughout the chamber through efficient motor fans ensuring a very good temperature sensitivity.
• An energy efficient cooling unit is installed in our carbon dioxide Incubators to enable bio chemical demand studies at lower room temperatures. We use ISI marked high end CFC free compressors of Kirloskar make, conforming to latest international standards and guidelines. 

Product Details:

Salient Features Of Incubator:

• Versatile usage.
• Ergonomic Design
• Energy Efficient
• Long life
• Low Maintenance
• Calibration And Protocol Documentation

Product Details:

SPECIFICATIONS:

 Body made of thick M.S./S.S.

 Top Plate over hangs by supporting of ceramic beads which ensures air insulation between plate and base unit.

 Selection cast iron / S.S.Plate

 Maximum surface temperature 300°C.

 Temp. Controlled by energy regulator/ Microprocessor Based PID Digital Temperature Indicator-cum-Controller

 Long last nichrome Elements.

 Various sizes available

  To work on 230 Volts A. / C. Only

Product Details:

TECHNICAL SPECIFICATION : Voltage:220v Power(W):1kw Weight:21KG Rotating bottle volume 1L Collection bottle volume 0.5L Vacuum:0.098Mpa Rotary power:30W

Product Details:

Bursting Strength Tester is used to determine the bursting strength of any fabric, leather, paper and corrugated boxes & HDPE Bags by using hydraulic pressure.

Product Details:

Working Temp-1100°c
Maximum Temp-1150°c
inner dia 100mm x outer dia-110mm
Double Wall High quality fabrication of M. S., Body M. S. sheet structure with Proper stiffeners and neat powder coat painting

Product Details:

GGT-1804 SENIOR RESEARCH BINOCULAR MICROSCOPE “ZEXTER:”

Research Binocular microscope with ball bearing quadruple revolving nose-piece having

positive click-stops coarse motion with universal locking device, condenser unit having

centering device, built-in-co-axial mechanical stage with sides graduated for slide

Manipulation with Binocular Head (Assembled from imported prism) and straight tube

Photomicrography with following optical combination.

Eye pieces: 5 X, 15 X, (Paired) and 1O X, (Wide field paired)

Objectives: 5X, 10X, 45 X, 100 X (Oil immersion)                                                                  

Product Details:

It is used for checking lime reaction in water under controlled conditions. The equipment consists of a 2000 ml capacity Dewar vessel complete with cover, 100 rpm -1000 rpm adjustable up and down electric stirrer with variable speed with colored LED Display of RPM, paddle, Heavy duty base stand and a digital Colored LED display temp. Thermometer with ‘A’ class PT-100 Sensor for great accuracy of temp. of solution in vessel. Temp. Range -50° to 200° C, Temperature / Resolution Accuracy ± 0.1° C.  Power: 230V/ 50Hz Single phase

Product Details:

GGT-1005 LAB. BALL MILL” ZEXTER:”

For mixing and grinding electrically operated.  Fitted with FHP geared motor with maximum speed of 80 RPM. Jar is made of Aluminum/S.S.  having steel balls of different sizes. Jar is inter-changeable and easily removable to operate on Single Phase 220 / 230 volts A.C. supply.

Product Details:

General Information

 The Mini Centrifuge is supplied with two rotors, one for microtubes and one for 0.2ml PCR strip tubes. The 6x 1.5ml rotor is designed to centrifuge up to six individual 1.5ml plastic microcentrifuge tubes. It will also accept 0.5m and 0.4ml tubes with the adapter supplied with the unit. Adapters are available separately for 0.2ml tubes. The strip tube rotor is designed to centrifuge two 8 x 0.2ml strip tubes. It will also accept up to 16 individual0.2ml tubes. Both rotors are designed for applications requiring relatively g-forces, such as microfiltration, cell separation and quick spin downs from the walls of tubes. Please read this manual thoroughly before attempting to operate the centrifuge. If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.

Product Details:

SPECIFICATION: To measure the rub proofness of printed paper, carton package & board by applied contact pressure. Two contact disc rotate in contact at same angular speed, giving contact relative velocity between all points of the disc. With the interchangeable dead weight and electrically driven system.