Vibrator Machine

Product Details:

MODEL NO – GGT-1230
Specification:
In these load frames “C” channels are used, they are welded at the top as well as bottom and with stand high loads. A hydraulic jack is fitted at center of the base of the load frame, over which can be fitted lower platen and spacer block with the help of centering pin. A lead screw passes through the top of the frame. To the lower end of this lead screw is fixed the upper platen with spherical seat for self-alignment. The platens are accurately machined, hardened and polished. The lower platen grooves to correctly place the specimen. The ram dia of the machine varies from the requirements of the customer. The lower pattern are at the base of the frame above the ram and it is rectangular in shape. Sufficient clearance is provided between the platens to fit in the cylindrical/ cube moulds. Spacer provided to adjust cubes and cylinders. A 20 cm dia. pressure gauge with maximum load induction pointer is fitted on the top panel and in turn is connected to the hydraulic pressure pipe. On the right hand a console is fitted within which the electrical motor is fitted along with its coupling which in turn is connected to the pumping unit. A slow / fast loading rate regulator fixed on the top of the console for adjusting the rate of loading. The machine is duly calibrated and passed after inspecting and analyzing it with a compression level indicator is provided as a dip stick.

Product Details:

(Cement Mortar Cube Vibrator), as per IS: 4031. This apparatus is suitable for making cubes of 70.6mm, for mortar strength evaluation. The mould is mounted on a vibrating platform with a frequency of 12000 ± 400 vibrations per minute to the platform are attached four matched springs. The whole assembly is operated by a revolving shaft with an eccentric mechanism. The machine is supplied complete with a time switch and a 70.6mm steel cube mould with base plate. Also Available: With Digital Timer