Clean Air Equipment

Product Details:

Air Shower is a fully self-contained unit with high degree of maneuverability. They are fully equipped to provide complete de-contamination solutions to the clean room or manufacturing /assembly area from personnel entering the space. The ease of operation of our air shower is such that, one just need to roll it at the door of the clean room, plug in and it is ready to be used. Our air showers are closed cubicles and work on the principle of subjecting the personnel through adequate velocity of clean air coming through a pre filter assembly comprising of poly fiber synthetic media of approximately 1” thickness (washable). And then the same air is passed through a high efficiency perfect air filter made from glass pleated non-woven filter media having a minimum efficiency of 99.97% at 0.3 micron particle size.

Features:

• The air shower must be properly designed and sized to maintain effective and efficient operations.
• At a minimum, HEPA filters are 99.97% efficient at 0.2- 0.3 microns
• Sufficient "wash down time" - at least 45 seconds - must be allowed in the air shower.
• The air supplied to the shower must be finely filtered to prevent personnel from being impinged with contaminants during the actual cleaning cycle.
• A fixed nozzle pattern must be followed and the nozzles must be preset to direct air in a downward flow to produce shearing, wash down effect. It is essential to have a fluttering of garments strong enough to loosen dust.
• The garments themselves must be made of material such as Tyvek, Teflon, Dacron or nylon that is less likely to shed than cloth; comfort and cost must not be the determining factor.
• The air shower must operate at a negative pressure. In other words, the pressure in the air shower must not exceed the pressure outside. The pressure must be less than the clean room side to prevent contaminates.
• Very importantly, personnel must act responsibly, i.e., when they stand off-center or crouch in a corner to avoid the air flow, they are defeating the whole purpose of the air shower. The individual must center himself in the shower and execute several complete360º turns during the 45 second duration of the air shower, with hands positioned over the head.

Product Details:

With our expertise in this domain, we are highly engaged in offering a diverse array of Fume Hood. These offered products are widely used in laboratories and research units of industries. Our experts are assuring that these products are made using fine quality and are widely acknowledged for their chemical resistant, non-conductive and corrosion proof nature. Moreover we are offering these products to our customers at nominal prices.

 

Features:

• Précised construction
• Optimum functioning
• Compact Designs

Product Details:

Basic Construction:

• Our Vertical laminar air flow benches are designed to conform to the United States federal standard 209B/BS5295 and meets the class 100 conditions. Our units are fabricated of.S. 304 garde. The inner portion of all our laminar air flows are S.S304 grade. The Outer Portion made up of M.S duly powder coated. The working tablealsois made of heavy gauge stainless steel sheet of grade ss-304. Front Door made of transparent tempered glass/Acrylic with weight balance movement. Theside panels made out of heavy plexi glass sheets are mounted on anodized aluminum frames. The whole unit is supplied with differential manometer to gauge/ Magnehelic Guagethe pressure drop in the unit while operation, beside the gas cock, power socket etc.

Filter Assembly:

• All our laminar air flows are fitted with fully washable synthetic pre-filter units and secondary high efficiency perfect air (HEPA) filters made of mini pleated non woven fabric. The efficiency of our filters have a rating better than 99.99% at DOP (cold) and 99.97% at DOP (Hot). Our units have the capacity to hold all suspended particles of size 0.3 micron.Velocity at the output of HEPA is 0.35 to 0.50 m/sec.

Product Details:

Biological Safety Cabinet are used to contain particulates within a particular work area. These particulates are usually biological agents. They do not control gaseous contaminants in any way. They are primarily used to allow laboratory workers to work with infectious agents without becoming exposed to the agents. Laminar Air Flow BIOSAFE Biological Safety Cabinet complies with the guidelines laid down by U.S. National Institute of Health, and the specifications of British Standard 5726 — Appendix A for class II Biological Safety Cabinets. It is an integral factory assembled system. The basic unit is of externally Melamine laminated body housing, Pre Filters, HEPA Filters & Blowers assembly etc. It is suitable for handling medium to low risk organisms encountered in research, Investigation, Labs in all branches of Medical, Agriculture, Pharmaceutical &; Science.

Features:

• Ergonomic Design
• Versatile Usage
• Low Noise And Vibration Levels
• Conforms to US Federal Standard 209 B
• Calibration And Protocol Documentation

Product Details:

We are a leading manufacturers and suppliers of Laminar Air Flow Benche. These offered products are manufactured using special technology and adheres strictly to the industry laid norms and standards. These offered products are used to provide clean air by killing all the bacteria and viruses present in the air. All these offered products are quality tested on various parameters laid down by the industry.

 

Features:

• Longer working life
• Washable
• Shock proof construction

Product Details:

Innoculation Chamber are most suitable for circulation free environment to eliminate cross contamination in sterile techniques involving culture growth, tissue staining and virus harvestings, The convenient working height of table top and ample working space provides working ease for uses while media preparation, Working table top made out of thick stainless steel sheet (SS-304 grade).

Product Details:

Product Over View:

• Our chemical fume hoods are conceptualized and designed to provide a work area which is free from all the potentially hazardous fumes or chemical effluents that may be emitted during the course of a given experiment or procedure in a laboratory.
• Our fume hoods capture the fumes released during an experiment by drawing fresh air from the environment, past the user into the unit.. This way the
• concentration of the chemical fumes/effluents are kept at the minimum possible
• levels in and around the breathing zone of the user. The vector of the air in the
• fume hood points to the inward direction and perpendicular to the face of the user.
• The velocity of the air is controlled at approximately 80 feet per minute, so as to
• control the particle kinetics of various aerosols and diffused gases.

Features:

• Ergonomic Design
• Energy Efficient Mechanism
• Low Noise Levels
• Conforms To ASHRAE-110-1995 (British Standard) Testing Method.

Construction Details:

• Our fume hoods are developed to be used as semi closed ventilated enclosures so as to protect the user from harmful and toxic fumes and vapors and to eliminate the possibility of accidental fire, which may be resulted due to the emission of inflammable gases during the course of a given experiment.
• Hence the material of construction of all our fume hoods are carefully chosen S.S-316 grade/ M.S duly Powder Coated. The work table is made of heavy gauges SS-316. All our fume hoods are provided with sliding sash made out of special grade shatter proof temper glass duly framed in aluminum frame with sliding motion and counter weight balanced mechanism.
• Our units ensure minimum illumination level of approx 800 lux on the work table.
• The unit is equipped very diligent heavy duty exhaust system, comprising of dynamically balanced centrifugal impeller with high speed motor of approx 1440 RPM (Heavy Duty 1/4 H.P A.C Motor ).

Air Velocity:

• Our fume hood ensure that the optimum face velocity of 80 feet – 100
• Feet per minute is maintained with an accuracy of + 10 feet/minute with the sash in complete open position.

Volume Of Exhaust:

• Our fume hoods are capable of maintaining a constant exhaust volume.
• The maximum variation permissible due to baffle adjustment, in our in house test procedure is 6% of the given volume of exhaust.

Testing Procedures Of Containment:

• Our fume hoods conforms to the performance test as per ASRAE-110-1995 British Standards of testing performance of chemical hoods.
• They have a AM (As manufactured) rating of 0.05 ppm/4 LPM at fully opened sash.
• Pressure (Static) Our fume hoods are designed to minimize the loss of static pressure at a given baffle opening position.
• As per our standard procedures the average loss of static pressure at any given four points at ninety degree angle and 3 duct dia from the fume hood will not exceed 75 feet perminute at 0.25 inch, with full sash opening and face velocity of 100 feetper minute.

Illumination Levels At work Space:

• Our fume hood ensure that a minimum of 800 lux light is available on the work table through the diffuser fluorescent light arrangement.

Exhaust Assembly:

• Our fume hoods are provided with a very strong and high end exhaust
• System having a range of 500 – 1250 CFM (designed as per the size of the hood). The exhaust assembly consists of a dynamically balanced
• Centrifugal impellers which are coupled with a heavy duty three phase
• Motor of crompton greaves/equivalent.

Product Details:

Product Over View:

Our chemical fume hoods are conceptualized and designed to provide a work area which is free from all the potentially hazardous fumes or chemical effluents that may be emitted during the course of a given experiment or procedure in a laboratory.

 

Our fume hoods capture the fumes released during an experiment by drawing fresh air from the environment, past the user into the unit. This way the concentration of the chemical fumes/effluents are kept at the minimum possible levels in and around the breathing zone of the user. The vector of the air in the fume hood points to the inward direction and perpendicular to the face of the user. The velocity of the air is controlled at approximately 80 feet per minute, so as to control the particle kinetics of various aerosols and diffused gases.

 

Features:

• Ergonomic Design
• Energy Efficient Mechanism
• Low Noise Levels
• Conforms To ASHRAE-110-1995 (British Standard) Testing Method.

Product Details:

Our chemical fume hoods are conceptualized and designed to provide a work area which is free from all the potentially hazardous fumes or chemical effluents that may be emitted during the course of a given experiment or procedure in a laboratory.

Our fume hoods capture the fumes released during an experiment by drawing fresh air from the environment, past the user into the unit.. This way the concentration of the chemical fumes/effluents are kept at the minimum possible levels in and around the breathing zone of the user. The vector of the air in the fume hood points to the inward direction and perpendicular to the face of the user. The velocity of the air is controlled atapproximately 80 feet per minute, so as to control the particle kinetics of various aerosols and diffused gases.

Product Details:

Applications:

• Biossafety is cabinet used to prote ct personnel, product and the environment from exposure to biohazards and cross contamination during routine procedures.
• Used for various applications in the life science, clinical, pharmaceutical and industriall laboratory.
• These Cabinets are designed to provide 3 basic types of protection
• Personnel protection from harmful agent s inside the cabinet
• Product protection to avoid contamination of the work, experiment or process Environment Protection.
• Environment Protection.

Product Details:

Product Details:

Biosafety Cabinet Class 100.